eide插件安装后汇编器设置里没有asm的选项

Linuxunion · 2024-05-05T09:44:58+00:00

使用环境  操作系统版本：debian12 操作系统平台(x86/x64)： VsCode 版本：1.90.0-insider EIDE 插件版本：v3.16.0 C/C++ 插件版本：v1.19.9 何种编译器(keil_c51/s...

eide插件安装后汇编器设置里没有asm的选项

Linuxunion

使用环境

操作系统版本：debian12
操作系统平台(x86/x64)：
VsCode 版本：1.90.0-insider
EIDE 插件版本：v3.16.0
C/C++ 插件版本：v1.19.9
何种编译器(keil_c51/sdcc/armcc5/armgcc/...)：armgcc
编译器版本(非编译问题可忽略)：

描述问题

我用eide导入了一个MDK的项目文件，但是在项目配置中没有出现汇编器的选项，也就是汇编器设置里是空的，没有出现类似armasm的汇编选项，我已经卸载eide插件并重装了，汇编器设置里还是空的。不知是哪里的问题？还需要安装什么软件吗？

屏幕截图

期望现象

build项目应该产生正常的结果，但是缺少汇编器选项后，build无法识别.s文件中的注释内容，如下图的分号开头的内容

Linuxunion

汇编.s文件的错误信息如下


>> [  2%] CC 'Drivers/PY32F0xx_HAL_Driver/Src/py32f0xx_hal_gpio.c'
>> [  5%] CC 'Drivers/PY32F0xx_HAL_Driver/Src/py32f0xx_hal_flash.c'
>> [  7%] AS 'Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s: Assembler messages:
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:1: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:2: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:3: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:4: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:5: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:6: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:7: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:8: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:9: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:10: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:11: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:12: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:13: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:14: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:15: Error: junk at end of line, first unrecognized character is `*'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:15: Error: bad instruction `copyright (c)2023 Puya Semiconductor Co.'
./Drivers/CMSIS/Device/PY32F0xx/Source/arm/startup_py32f003x8.s:16: Error: junk at end of line, first unrecognized character is `*'

Linuxunion

没人遇到这个问题？

admin

Linuxunion

你用错了编译器，你这个项目是 armcc 的，但你用的是 gcc

Linuxunion

找到问题了，startup.s文件有分keil mdk和gcc的，这里导入的mdk工程带的startup文件不能用gcc编译，必须要找用于gcc的startup文件才能便于。这个东西eide的帮助上是不是应该加个说明呀，对小白太不友好了

admin

Linuxunion

一般的使用场景，导入MDK项目后，是不会去切换编译工具的，自己切换成gcc的，也是之前用过gcc，比较了解的才会去换

关于 armcc 项目迁移到 gcc 的注意事项，网上有很多，这个跟你用什么IDE和插件是无关的

18373712565

遇到同样的问题，小白怎么确认startup.s文件用的是armgcc还是gcc编译器？

admin

18373712565

自己对比一下语法

armcc

; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>

Stack_Size		EQU     0x800

                AREA    STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem       SPACE   Stack_Size
__initial_sp


; <h> Heap Configuration
;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>

Heap_Size      EQU     0x4000

                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem        SPACE   Heap_Size
__heap_limit

                PRESERVE8
                THUMB


; Vector Table Mapped to Address 0 at Reset
                AREA    RESET, DATA, READONLY
                EXPORT  __Vectors
                EXPORT  __Vectors_End
                EXPORT  __Vectors_Size

__Vectors       DCD     __initial_sp               ; Top of Stack
                DCD     Reset_Handler              ; Reset Handler
                DCD     NMI_Handler                ; NMI Handler
                DCD     HardFault_Handler          ; Hard Fault Handler
                DCD     MemManage_Handler          ; MPU Fault Handler
                DCD     BusFault_Handler           ; Bus Fault Handler
                DCD     UsageFault_Handler         ; Usage Fault Handler
                DCD     0                          ; Reserved
                DCD     0                          ; Reserved

gcc


  .syntax unified
  .cpu cortex-m3
  .fpu softvfp
  .thumb

.global g_pfnVectors
.global Default_Handler

/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss

.equ  BootRAM, 0xF108F85F
/**
 * @brief  This is the code that gets called when the processor first
 *          starts execution following a reset event. Only the absolutely
 *          necessary set is performed, after which the application
 *          supplied main() routine is called.
 * @param  None
 * @retval : None
*/

  .section .text.Reset_Handler
  .weak Reset_Handler
  .type Reset_Handler, %function
Reset_Handler: