使用环境
<!-- 必须 告知插件运行的环境，帮助开发者定位问题 -->
- 操作系统版本：win11
- 操作系统平台(x86/x64)：x64
- VsCode 版本：1.99.2
- EIDE 插件版本：3.21.1
- C/C++ 插件版本：1.24.5
- 何种编译器(keil_c51/sdcc/armcc5/armgcc/...)：keil_c51
- 编译器版本(非编译问题可忽略)：
描述问题
<!-- 使用简明清晰的语言描述您的问题 -->
我使用的JLink进行烧录，编译没有问题，就是无法烧录，JLink连接检查过没有问题，我是哦那个keil5可以正常烧录，就是EIDE不行。
屏幕截图
<!--使用一些截图能够更好地展现问题 -->
`SEGGER J-Link Commander V6.90 (Compiled Dec 11 2020 17:09:43)
DLL version V6.90, compiled Dec 11 2020 17:08:01
J-Link Commander will now exit on Error
J-Link Command File read successfully.
Processing script file...
J-Link connection not established yet but required for command.
Connecting to J-Link via USB...O.K.
Firmware: J-Link V9 compiled May 7 2021 16:26:12
Hardware version: V9.60
S/N: 69653511
License(s): RDI, GDB, FlashDL, FlashBP, JFlash
VTref=3.324V
Target connection not established yet but required for command.
Device "STM32F103CB" selected.
Connecting to target via SWD
Found SW-DP with ID 0x1BA01477
Found SW-DP with ID 0x1BA01477
DPIDR: 0x1BA01477
Scanning AP map to find all available APs
AP[1]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x14770011)
Iterating through AP map to find AHB-AP to use
AP[0]: Core found
AP[0]: AHB-AP ROM base: 0xE00FF000
CPUID register: 0x411FC231. Implementer code: 0x41 (ARM)
Found Cortex-M3 r1p1, Little endian.
FPUnit: 6 code (BP) slots and 2 literal slots
CoreSight components:
ROMTbl[0] @ E00FF000
ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 001BB000 SCS
ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 001BB002 DWT
ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 000BB003 FPB
ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 001BB001 ITM
ROMTbl[0][4]: E0040000, CID: B105900D, PID: 001BB923 TPIU-Lite
Cortex-M3 identified.
Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.
Reset: Halt core after reset via DEMCR.VC_CORERESET.
Reset: Reset device via AIRCR.SYSRESETREQ.
PC = 08000248, CycleCnt = 00000000
R0 = 00000001, R1 = 20001DB8, R2 = 00000000, R3 = 08004A71
R4 = 00000000, R5 = 00000001, R6 = 200016A4, R7 = 08004A70
R8 = 00000000, R9 = 00000000, R10= 08004AA8, R11= 00000000
R12= 00000000
SP(R13)= 20001E00, MSP= 20001E00, PSP= 20000C50, R14(LR) = FFFFFFFF
XPSR = 01000000: APSR = nzcvq, EPSR = 01000000, IPSR = 000 (NoException)
CFBP = 00000000, CONTROL = 00, FAULTMASK = 00, BASEPRI = 00, PRIMASK = 00
FPU regs: FPU not enabled / not implemented on connected CPU.
Downloading file [d:\workspace\STM32_Projects\EN3251\build\EN3251\EN3251.hex]...
Writing target memory failed.
Script processing completed.`
期望现象
<!--您期望应该产生的，但实际上却没有发生的结果-->